ME Publications

Dr. Bose

A. Bose, P. He, C. Liu, B.D. Eiiman, R. J. Twieg, and S. D. Huang, "A Strong Electron -Acceptor Methylviologen Dications Confined in a 2D Inorganic Host: Synthesis, Structural Characterization, Charge Transport and Electrochemical Properties of (MV)0.25V2O5" Journal of American Chemistry Society. , 2002,124, 4-5.

A. Bose, R. K. Gilpin, and M. Jaroniec, "Thermogravimetric and Nitrogen Adsorption Studies of Mesoporous Silica Coated with Siloxane Polymer" Interface Science, 2001,240, 224- 228.

A. Bose, R. K. Gilpin, and M. Jaroniec, "Fourier Transform Infrared Spectroscopy Studies of the Interaction of Functionalized Siloxane Polymers with Porous Silica" J. Colloid and Interface Science, 2000, 226, 131-135.

Dr. Coller

B.D. Coller, "Intriguing nonlinear dynamics of a controller with a sluggish actuator" Automatica, 39: 2049 - 2058, 2003.

B.D. Coller, P.A. Chamara, "Structural nonlinearities and the nature of the classic flutter instability" Journal of Sound and Vibration, (posted on journal web site on November 19, 2003. To appear in print soon).

P.A. Chamara and B.D. Coller, "Double flutter in an aeroelastic system" AIAA Journal, 39, 2001

B.D. Coller, "Vortex model for control of diffuser pressure recovery" Proceedings of the 2000 Conference on Decision and Control, 2000.

B.D. Coller, B.R. Noack, S. Narayanan, A. Banaszuk, A. Khibnik, "Reduced-basis model for active separation control in a planar diffuser flow" AIAA Paper 2000-2562.

Dr. Fallahi

Fallahi, B., 2003,"Integration of Dynamic Equation of a rotating Timoshenko Beam via Chebyshev Polynomials" International Journal of Modelling and Simulation, vol. 23, no. 3, pp172-178.

Weber, Timothy, Motavalli, Saeid, Fallahi, Behroozs, and Cheraghi, S. Hossein, "A Unified Approach to Form Error Evaluation" Journal of International Societies for Precision Engineering and Nanotechnology, vol. 26, no. 3, pp. 269-278, 2002.

Fallahi B. and Seif M., "Integration of Dynamic Equation of Spring-Mass-Damper Systems via Chebyshev Polynomials" International Journal of Computer Mathematics, vol. 79, no. 8, pp. 923-930, 2002.

Fallahi, B., Seif, M., and Tolocka, R.T., "An Optimization Approach for Path and Mechanical Advantage Synthesis of Planar Mechanisms" Mechanika, vol. 2 no. 34, pp. 46-50, 2002.

Bansevicius, R., Fallahi, B., Tolocka, T., and Varnavicius, V., "Smart Underactuated Manipulator: Design and Dynamics Simulation" Mechanika, vol 6 no. 38, ISSN 1392-1207, p. 63, 66, Kaunas: Technologija, 2002.

Motavalli, Saeid, Zong, Helen, and Fallahi, Behrooz, "A Linear Approximation Technique for Evaluation of Form Tolerances Proceedings 12th International Conference on Felexible Automation and Intelligent Manufacturing, Dresden, Germany, 2002.

Kusculuoglu, Ziya K., Fallahi, Behrooz, and Royston, Thomas J., "New Constitutive Model for Vibrations of a Beam with a Piezoceramic Patch Actuator" Proceedings, SPIE, pp. 92-103.

Bansevicius, R., Fallahi, B., Tolocka, T., and Varnavicius, V., "Variable Structure Manipulator" Proceedings, Vibroengineering, ISSN 1392-8716, vol 4. no. 2(9), PI Vibromechanika, Vilnius, Lithuania, p. 19-21, 2002.

N. Jalili, B. Fallahi,and Z.K. Kusculuoglu, 2001, "A New Approach to Semi-Active Vibration Suppression using Adjustable Inertia Absorber" International Journal of Modeling and Simulation,.Vol. 21(2), pp148‑154

R. Arthinaryanan, B. Fallahi, and R. Bansevicius, 2001. "Design and Control of Precise Robots with Active Multi-Degree of Freedom Kinematic Pairs" Mechanika, N1(27),pp48-53.

Dr. Ganesan

Yang, Y., Ganesan, S. and Majumdar, P., "An Investigation of the Effect of Cutting on Temperature Rise in Machining Processes" Proceedings of ISHMT/ASME Heat and Mass Transfer Conference, pp. 1179-1184, 2000.

Dr. Gau

Jenn-Terng Gau and Gary L. Kinzel, "An Experimental Investigation of the Influence of the Bauschinger Effect on Springback Predictions" Journal of Materials Processing Technology 108 (2001) pp 369-375.

Jenn-Terng Gau and Gary L. Kinzel, "A New Model for Springback Prediction in Which the Bauschinger Effect is Considered" International Journal of Mechanical Science 43 (2001) pp 1813-1832.

Dr. Gupta

Zhou, Xiaoping and Gupta, Abhijit, "A Damage Identification Method Using Vibration Modal Parameters Through Finite Element Discretization" Proceedings of IMECE'03, Washington, D.C., November 15-21, 2003.

A. Gupta, T. Mulcahy, and J. Hull, "Electromagnetic Shock Absorbers" Proceedings of IMAC XXI, 2003

Gupta, A. and Ram, Y., "Structural Modification and Dynamic Absorption" Proceedings of IMAC XX, Los Angeles, CA, pp 1509-1511, 2002.

A. Gupta and S. Thakur, "Fatigue Life of Aluminum Beams Under Random Vibrations" Proceedings of IMAC XIX, 2001, pp. 1737-1741.

Dr. Kim

Kim, Meung J., "Transient Evaporative Laser Cutting with a Moving Laser by a Boundary Element Method" Journal of Applied Mathematical Modeling, 2004, accepted for publication.

Kim, Meung J., "Finite Element Analysis of Evaporative Cutting with a Moving High Energy Pulse Laser" Journal of Applied Mathematical Modeling, 2001, Vol. 25, pp.203-220.

Kim, Meung J., "Transient Evaporative Laser Cutting with Boundary Element Method" Journal of Applied Mathematical Modeling, 2000, Vol. 25, pp.25-39.

Dr. Kostic

Kostic, M., "Work, Power, and Energy" Encyclopedia of Energy (C.J. Cleveland, Editor-in-Chief), Volume 6, pp. 527-538, ISBN: 0-12-176480-X, Elsevier, 2004.

Kostic, M., "Fuel-Cell and Heat-Engine Energy-Conversion Comparative Analysis" ASEE-2004 IL-IN Section Conference, "Engineering Engineering Education, American Society for Engineering Education, East Peoria, March 26-27, 2004 [PPT]

Vaddiraju, S.R., M. Kostic, L. Reifschneider, A. Pla-Dalmau, V. Rykalin, and A. Bross, "Extrusion Simulation and Experimental Validation to Optimize Precision Die Design" (Word) ANTEC 2004, The Annual Technical Conference, Society of Plastics Engineers, Chicago, May 16-20, 2004.

Reifschneider, L.G., M. Kostic, and S.R. Vaddiraju, "Computational Design of a U-Profile Die and Calibrator" ANTEC 2004, The Annual Technical Conference, Society of Plastics Engineers, Chicago, May 16-20, 2004.

Kostic, M., "Sampling and Aliasing: An Interactive and On-Line Virtual Experiment - What we see is not what it is!" ASEE 2003 Annual Conference, American Society for Engineering Education, 2003.

Kostic, M., "Leadership and Information Technologies in Education" ASEE-2002 IL-IN Section Conference: "Engineering Education in Changing Economy," Illinois Institute of Technology and American Society for Engineering Education, 2002.

Dr. Majumdar

Kasula Bhavani and Pradip Majumdar "Three-Dimensional Finite Element Analysis of Melting in an Alloy Irradiated with a High Energy Laser Beam" Proceedings of the 2003 International Mechanical Engineering Congress and R& D Expo, Paper NO: IMECE2003-43688, 2003.

Majumdar, Pradip and Ravi Sharma, "Thermal Effects in a Laser Irradiated Biological Tissue" Proceedings of the 6th ASME-JSME Thermal Engineering Joint Conference, Paper No: TED - AJ03-210, 2003.

Majumdar, Pradip and Prasanta Deb, "Computational Analysis of Turbulent Fluid Flow and Heat Transfer Over an Array of Heated Modules Using Turbulence Models" Journal of Numerical heat Transfer, Vol. 43, No. 7, pp. 669- 692, 2003.

Majumdar, Pradip and Deb, P., "Computational Analysis of Turbulent Fluid Flow and Heat Transfer Over an Array of Heated Modules Using Turbulence Models" Journal of Numerical Heat Transfer, 2002.

Liu, Beimin and Majumdar, Pradip, "Numerical Simulation of Phase Change Heat Transfer in PCM-Encapsulated Heat Sinks" Proceedings of the Eighteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium - SEMI-THERM XVIII, California, March, 2002.

Majumdar, Pradip and Xia, Hong, "A Green's Function Model for the Analysis of Laser Heating of Materials" Proceedings of the 5th ISHMT/ASME Heat and Mass Transfer Conference, pp. 1092-1099, January 2002.

Sharma, Ravikant and Pradip Majumdar, "Finite Element Analysis of Heat Generation and Heated Zones in Laser Irradiated Biological Tissue" Proceedings of the 20th International Congress on Applications of Lasers and Electro-Optics Vol. 92/93, pp. 960-969, 2001

Dr. Payvar

Tatara R. and Payvar, P., "Multiple Engagement Wet Clutch Heat Transfer Model" Journal of Numerical Heat Transfer, Part A, 42:pp 215-231, 2002.

Tatara, R., and Payvar, P., "A Spray Boiling of R-11 on Integral Fin Tube Bundles" International Journal of Refrigeration, Vol 24, pp 744-754, 2001.

Dr. Short

Seif, M., Short, S.R., "Determination of Residual Stress in Thin-Walled Composite Cylinders" Experimental Techniques, 26 (2), pp. 43-46, 2002.

Short, S.R., "Effect of Beam Overhang Length on Interlaminar Shear Strength Composite Test Specimen" ICCE/9, Ninth Annual International Conference on Composites Engineering, San Diego, CA, pp. 721-723, July 1-6, 2002.

Dr. Song

Ye, T. and Song, S.M., "Gait Planning for Legged Robots" to be presented in The Eleventh World Congress in Mechanism and Machine Science, Tianjin China, 2004.

Lin, J.N. and Song, S.M., "Modeling Gait Transitions between Two Periodic Gaits for Quadrupeds and Hexapods" ASME Paper No. IMECE2003-42710, Proc. of ASME Int. Mechanical Engineering Congress and Exposition (IMECE), Washington D.C., November 16-21, 2003.

Lin, J.N. and Song, S.M., "Modeling Gait Transitions of Quadruped and Their Generalization with CMAC Neural Networks" IEEE Transactions, Journal of System, Man and Cybernetics Part C: Applications and Reviews, Vol. 32, No. 3, pp.177-189, August 2002.

Lin, B.S. and Song, S.M., "Dynamic Modeling, Stability and Energy Efficiency of a Quadrupedal Walking Machine" J. of Robotic Systems, Vol. 18, No. 11, pp.657-670, 2001.