FAQs - How To

How to use the projector, DVD, VCR, ELMO and Screen Broadcaster

To project the instructor's PC screen

  1. Turn on the instructor's PC
  2. Find the EPSON projector remote and press the power button
  3. If the instructor's screen is not being projected. Press the source button on the projector remote. Use the up/down arrow keys to select the computer1 input, then press enter.

To project a document using the ELMO document projector

  1. Make sure the power switch on the ELMO is turned on
  2. Make user the montior output on the ELMO is set to MAIN
  3. Press the LAMP button to turn on the lamps
  4. Find the Video A/B switch and make sure the switch is set on the ELMO
  5. Find the EPSON projector remote and press the power button
  6. On the projector remote press the source button and use the up/down arrow keys to select the Video input. then press enter

To project a DVD using the VCR/DVD deck

  1. Press the power button on the VCR/DVD combo deck
  2. Press the large VCR/DVD button so the green light turns on for DVD side of the deck.
  3. Find the VIDEO A/B SWITCH and set the switch for the DVD/VCR
  4. Find the EPSON projector remote and press the power button
  5. On the projector remote press the source button and use the up/down arrow keys to select the video input, then press enter

To project a VHS tape using the VCR/DVD deck

  1. Press the power button on the VCR/DVD deck
  2. Press the large VCR/DVD button the green light on the VCR side lights up.
  3. Find the VIDEO A/B SWITCH and set the switch for VCR/DVD
  4. Find the EPSON projector remote and press power button
  5. On the projector remote press the source button and use the up/down arrow keys to select the video input, then press enter

To broadcast the instructor PC screen to students' PC screen

  1. Press the TRANSMIT button on the LPS CONSOLE unit located on the desk next to the instructor's monitor
  2. When you are finished broadcasting your screen press the CLEAR button

To broadcast a document using the ELMO

  1. Make sure the ELMO power switch in on
  2. Press the LAMP button on the ELMO to turn on the lamps.
  3. Make sure the MONITOR output is set to MAIN
  4. Press the BLANK/TRANSMIT AUX-IN button on the LPS CONSOLE unit located on the desk next to the instructor's monitor.