The electrical engineering discipline encompasses a broad spectrum of technical areas that study electrical phenomena and its properties. The theory, design, development and application of systems that generate power through circuitry, equipment, and other various devices, create innovative ways to improve people's lives. The electrical engineering field employs the largest number of engineers because almost everything in today's world need electricity to run.
The curriculum provides students with a fundamental and practical knowledge of electronic devices and circuits, electromagnetic fields, electronic materials, digital signals and systems, computers, communication systems, antenna design, and many forms of electronic design. The new Engineering Building (built in 1995) includes extensive laboratory facilities that are equipped with state-of-the-art representations of exactly that which is found in the commercial sector. There is the robotics and sensor lab, a microelectronic design lab, a class 100 clean room, an application oriented DSP lab with an anechoic chamber, an RF communication slab with a walk in shielded enclosure, an out-of-doors antenna testing tower, a dedicated computer lab, an image processing lab, and a biomedical signal analysis lab.
The Department of Electrical Engineering welcomes transfer students from Illinois community colleges. Students find it easy to continue their studies at NIU if they plan well. Therefore, following the guidelines in this brochure while completing an Associate's Degree is highly recommended1. Students should always work closely with their community college advisor. Please contact Moraine Valley Community College, Academic Advising at (708)974-5721 for more help in planning your academic career.
| Courses at Moraine |
Equivalent courses at NIU |
IAI Codes |
|
| CHM 131 | Chemistry (University Oriented) I | CHEM 210T+212 | EGR 961 |
| COM 101 | Composition I | ENGL 103 | |
| COM 102 | Composition II | ENGL 104 | |
| COM 103 or COM 112 |
Speech Fundamentals | COMS 100 | |
| Technical Communications II | COMS 100 | ||
| EGN 201 | Engineering Statics | MEE 210 | EGR 942 |
| EGN 202 | Engineering Dynamics | MEE 211 | EGR 943 |
| MIS 160 or CSC 140 |
C++ Programming I | CSCI 240 | |
| Intro Computer Science | CSCI 240 | ||
| MTH 150 | Analytic Geometry & Calculus I | MATH 229 | EGR 901 |
| MTH 151 | Analytic Geometry & Calculus II | MATH 230 | EGR 902 |
| MTH 152 | Analytic Geometry & Calculus III | MATH 232 | EGR 903 |
| MTH 201 | Differential Equations | MATH 336 | EGR 904 |
| PHY 203 | Mechanics | PHYS 253 | EGR 911 |
| PHY 204 | Heat, Electricity and Magnetism | PHYS 273 | EGR 912 |
| Humanities and Arts Social Sciences |
|||
| [1]Northern Illinois University permits students to transfer up to a maximum of 66 semester hours of community college credit. Only A.A. and A.S. degrees satisfy NIU's general education requirements. | |||
NIU's College of Engineering and Engineering Technology no longer requires sequences in Social Sciences and Humanities. Therefore, students only need to satisfy NIU's general education requirements. When choosing general education/core competency courses please consult with your Oakton College advisor, verify general education requirements in the NIU Undergraduate Catalog, and check the Community College Articulation Tables for transferability.
Remaining classes to be taken at NIU's College of Engineering and Engineering Technology to major in Electrical Engineering.
| ELE 210 | Engineering Circuit Analysis |
| ELE 210U | Engineering Circuit Laboratory Project |
| ELE 250 | Computer Engineering I |
| ELE 315 | Signals and Systems |
| ELE 330 | Electronic Circuits |
| ELE 335 | Theory of Semiconductor Devices I |
| ELE 340 | Electrical Power Systems |
| ELE 350 | Engineering Logic Design |
| ELE 356 | Computer Engineering II |
| ELE 360 | Communication Systems |
| ELE 370 | Engineering Electromagnetics |
| ELE 380 | Control Systems I |
| ELE 491 | Electrical Engineering Design Proposal |
| ELE 492 | Electrical Engineering Design Project |
| IENG 220 | Engineering Economy |
| PHYS 283 | Fundamentals of Physics III |
| STAT 350 or IENG 335 |
Introduction to Probability and Statistics |
| Statistics for Engineering | |
| UEET 101 | Introduction to Engineering |
Electives may be any ELE course numbered 400 or higher with the exception of ELE 491, ELE 492 and ELE 497. With the approval of the Department of Electrical Engineering, other mathematics, sciences, or engineering courses maybe used as electives. At least 12 of these 18 semester hours must be from the Department of Electrical Engineering, and a minimum of two semesters must be selected from one of the following areas: Microelectronics/Biomedical, Power Controls, Digital Communications, Electromagnetics.
For more information on the Department of Electrical Engineering write or call:
Department of Electrical Engineering
CEET EB 330
Northern Illinois University
DeKalb, IL 60115-2854
(815)753-9974
For undergraduate application materials contact:
Office of Admissions
Northern Illinois University
DeKalb, IL 60115-2857
(800)892-3050 (toll-fee in Illinois)
or (815)753-0446
For more information on transfer programs at Moraine Valley Community College contact:
Moraine Valley Community College
Academic Advising
10900 S 88th Ave
Palos Hills, IL 60465-9988
(708)974-5721
Disclaimer: Although NIU attempts to accommodate the course requests of all students, some course offerings may be limited by financial, space, and staffing considerations, or may otherwise be unavailable. Nothing in this brochure may be construed to promise or guarantee registration in any course or course of study (whether required or elective), nor may anything be construed to promise or guarantee the completion of an academic program within a specific length of time. All degree requirements are subject to the provisions and notices in the Undergraduate Catalog. Information in this brochure is valid through August 2007.